Managing SBC Devices

The Known SBCs page displays a list of all SBC devices that are connected to Live Platform.

➢

To display list of managed SBC devices:

In the Multitenant portal Navigation pane, select Configuration > SBC.

The table below describes the parameters in this page.

Parameter	Description
Id	Id of an SBC device that is added directly on the UMP-365.
OVOC Sbc Id	Id of an SBC device that is added in the Live Platform Operation Center portal and synchronized with UMP-365 through a SIP Connection that is associated with this device.
Name	Known FQDN of the SBC device/NAT IP address.
NAT IP Address	NAT IP address of the SBC device.
Device FQDN	Known FQDN of the SBC device.
HTTPS	Indicates whether the device connects to Live Platform over an HTTPS connection.
Communication path	Direct connection (Fqdn)
Gateway User	The name of the Security administrator user account configured on the SBC that is used to connect to UMP-365.
Used by OC	Indicates Yes when the SBC device is attached to a Calling Profile that is attached to an Operator Connect service managed through this Live Platform instance.
Status	The status of the connection between UMP-365 and the SBC device.
SIP Users Count	The number of Registered SIP users managed under Site Locations (see below).
Sites Count	The number of site locations including both Tenant-based and IP Group-based SIP Connections that are configured on the SBC device.
Actions
Reload from OVOC	Updates the list of SBC devices that are connected to Live Platform Operation Center User Management Pack 365 SP Edition
Add SBC Devices	Add new SBC devices directly on UMP-365 (Add SBC Devices).
Check connections	Checks the connection between UMP-365 and the SBC device. A confirmation message is displayed.
Show SIP Connections	Displays a list of configured SIP connections that are connected to specific SBC devices (see Show SIP Connections).
Edit	Configure the communication method used to connect the SBC device to UMP-365 (see Configure SBC Communication Mode).
Delete	Delete a SIP Connection. You are prompted to confirm.
Import	Import a dial plan from an SBC device (Import Dial Plan from SBC Device (Import Customer Service).
Show Prefixes	Display a list of configured number prefixes in the dial plans loaded to the managed SBC devices (Show Prefixes).